Razor Sharp System Kits

Razor Sharp is the edgemaking system; 'for a Razor Sharp edge every time!'

The Razor Sharp Edgemaking System consists of two compressed paper wheels that will fit on any buffer or bench grinder.

• One wheel is coated with 180 grit Silicon Carbide and is used to develop a burr or wire-edge along the cutting edge.
• The Conditioning Wax (a special formula of fats, oils and waxes) is applied to the grit wheel to lubricate and control heat.
• The second wheel is slotted and, with the help of the included jeweller's rouge, is used to remove burrs and polish the cutting edge.
• A grit wheel will sharpen a couple hundred knives before it needs recoating. An additional 3oz container of Silicon Carbide is provided within the kit, enough to recoat the grit wheel 15 to 20 times. This can also be purchased separately.
  

Complete instructions are included in each kit.

Wheels are available in 8" or 10" diameters. If you're using a 6" bench grinder you will want the 8" Deluxe kit. This is so that you have enough clearance between the face of the wheel and the face of the motor housing to accommodate the handle and your fingers to sharpen the knife properly. The 10" Magnum kit is recommended for use on an 8" machine.

Razor Sharp kit components are available to purchase separately.

If you have any questions at all when ordering this product, or would like further advice please do not hesitate to get in touch.

**Please note we are currently awaiting delivery of the 8" x 1/4" (1/2" arbor hole).